The Special Forces Ammo Can Holder is designed to function with the MK93 Gun Mount. It will hold a PA 70 can (225 rounds of 12.7 mm or 48 rounds of 40 mm) or two 100 round cans of 12.7 mm or one 32 round can of 40 mm. It is not necessary to rotate the holder to switch between different types of ammo cans. The SF Ammo Can Holder components are made from noncorrosive materials. The SF Ammo Can Holder is in use with the U.S. Army, U.S. Marine Corps, U.S. Navy, and U.S. Special Forces.

Both of the above ammo can holders are designed to function with the MK93 Machine Gun Mount and are rapidly detachable to allow installation of the 40 mm Ammo Can Holder. The stainless steel ammo can holder is designed to function with the stainless steel MK93 mount which is primarily used in marine applications. The carbon steel ammo can holder is designed to function with the carbon steel MK93 mount which is primarily used in vehicle applications. Both ammo can holders are in use by both the US and foreign militaries.

4 Bay: Part No. M70-020

The 4 Bay Ammo Can Bin is designed to attach to desired locations inside the vehicle on either the floor or an interface plate. The most common location is in the forward part of the cargo bed on an interface plate. The bin is designed to hold eight 100 round 12.7 mm cans or four PA 70 cans (225 rounds of 12.7 mm per can) or four 32 round 40 mm cans or a combination of the three. The bin is fabricated from noncorrosive materials. The bin is in service with the U.S. military.

7 Bay: Part No. M70-021

The 7 Bay Ammo Can Bin is designed to attach to desired locations inside the vehicle on either the floor or an interface plate. The most common location is in the forward part of the cargo bed on an interface plate. The bin is designed to hold fourteen 100 round 12.7 mm cans or seven PA 70 cans (225 rounds of 12.7 mm per can) or seven 32 round 40 mm cans or a combination of the three. The bin is fabricated from noncorrosive materials. The bin is in service with the U.S. military.

The 40 mm Ammo Can Holder is designed to function with the MK93 Machine Gun Mount and is rapidly detachable to allow for installation of the 12.7 mm Ammo Can Holder. The 40 mm Ammo Can Holder can attach to the MK93 in two directions, one to position the 32 round can for proper feeding and the other to position the 48 round can for proper feeding.The 40 mm Ammo Can Holder is in use with both US and foreign militaries.

Bracket, Mounting, for use with M1113.
Part No. M70-336

Bracket, Mounting, for use with M1025.
Part No. M70-337

The mounting brackets, M70-336 and M70-337 mount to the rear of the turret using existing turret bearing mounting holes. Longer mounting hardware is provided. The mounting bracket is designed for use with the 3 Bay Ammo Can Holder which can be rapidly removed and installed using captive ball lock pins. The low-profile 3 Bay Ammo Can Bin which can be rapidly removed and installed using captive ball lock pins. The low-profile 3 Bay Ammo Can Bin will hold six 12.7 mm 100 round ammo cans or three 12.7 mm 225 round (PA 70) ammo cans or three 40 mm 32 round ammo cans. Combinations of all three types of ammo cans can be loaded. Heavy duty bungees are provided to secure the ammo cans in place. The weight of the bracket and bins with ammo balances the turret and makes it much easier to traverse particularly if the vehicle is on a steep hill. The brackets and Ammo Can bins are in use with the U.S. Army, US Marine Corps, U.S. Navy, and US Special Forces.

3Bay: Part No. M70-027 (right side bin) M70-028 (left side bin).

The 3 Bay Ammo Can Bin is designed to rapidly attach to shouldered bolts on the left and right jack rails that are not part of this bin. The bin is designed to hold three 200 round 7.62 mm cans or three 200 round 5.56 mm drums or a combination of both. The bin is fabricated from noncorrosive materials. The bin is in service with the U.S. military.

5 Bay: Right Hand, Part No. M70-030. Left Hand, Part No. M70-031.

The 5 Bay Ammo Can Bin is designed to rapidly attach to shouldered bolts on the left and right jack rails that are not part of this bin. The bin is designed to hold five 200 round 7.62 mm cans or five 200 round 5.56 mm drums or a combination of both. The bin is fabricated from noncorrosive materials. The bin is in service with the U.S. military.

The L-shaped Ammo Can Bin is designed to attach to desired locations inside the vehicle on either the floor or an interface plate. (The most common location is in the forward part of the cargo bed on the left and right side on an interface plate.) The bin is designed to hold two 100 round 12.7 mm cans or one PA 70 can (225 rounds of 12.7 mm) or one 32 round can of 40 mm and four 200 round cans of 7.62 mm or four 200 round drums of 5.56 mm. The bin is fabricated from noncorrosive materials. The bin is in service with the U.S. military.

The 2 Bay Ammo Can Bin is designed to attach to desired locations inside the vehicle on either the floor or an interface plate. The most common location is to the left of the truck commander. The bin is designed to hold two 200 round 7.62 mm cans or two 200 round 5.56 mm drums or a combination of both. The bin is fabricated from noncorrosive materials. The bin is in service with the U.S military.