The Secondary Weapons Station Type 3, HMMWV is a weapons system that allows a secondary weapon to be mounted in conjunction with the main weapon of a HMMWV. The Secondary Weapons Station Type 3 allows the gunner of a HMMWV to quickly transition from the main weapon to a secondary weapon without removal of the primary weapon from its mount. The Secondary Weapons Station Type 3, HMMWV is compatible with both the M240 and the M249 machine guns. This unit requires a standard HMMWV turret ring with mounting adaptor for a Tube Launched Optical Guided Weapon (TOW) or other optical sights. No holes are required to install this item and it will not interfere with the operation of the main weapon.

The Stryker Mounting Bracket is intended for the Recon Variant Stryker vehicle platform, which enable rear security for a vehicle crew. This mounting bracket is mounting under the rear center antenna, with two mounting locations on the mounting bracket. This enables the operator to fire the gun system from either hatch location in the rear of the vehicle.

The HMMWV B pillar mounting bracket bolts to existing holes, using longer hardware and provides a stainless steel post for a Swing Arm and gun mount to operate. A travel lock is provided on the bracket and swings in place to pin into the travel lock block on the rear of the H24 family of machine gun mounts. A ball lock pin is used to secure the travel lock in place. The travel lock secures the weapon facing outboard for a more menacing appearance. The bracket and travel lock components are made from noncorrosive materials. The bracket and travel lock are in use with the U.S. Army, U.S. Marine Corps, U.S. Navy, and U.S. Special Forces. The bracket and travel lock are safety certified by the U.S. Army.

The Secondary Weapon Station Mounting Bracket bolts to six existing holes on the HMMWV TOW pedestal using longer hardware and provides a stainless steel post for a Swing Arm and Gun Mount to operate. A travel lock is provided on the bracket and swings in place to pin into the travel lock block on the rear of the H24 family of machine gun mounts. A ball lock pin is used to secure the travel lock in place. The Mounting Bracket and Travel Lock are fabricated from noncorrosive materials.The Mounting Bracket and Travel Lock are in use with the U.S. Special Forces, and are safety certified by the U.S. Army.

The HMMWV Right Front Windshield Base Mounting Bracket bolts to 3 external existing holes and 3 additional holes are required to be drilled. The bracket provides a stainless steel post for a Swing Arm and gun mount to operate from the front right seat. A travel lock is provided on the bracket and swings in place to pin into the travel lock block on the rear of the H24 family of Machine Gun Mounts. A ball lock pin is used to secure the travel lock in place. The travel lock secures the weapon facing forward for a more menacing appearance. It is necessary for the vehicle to have the low air intake for this bracket to be installed. The bracket and travel lock components are made from noncorrosive materials. The Mounting Bracket Kit is in use with the U.S. Army, U.S. Marine Corps, U.S. Navy, and U.S. Special Forces. The Mounting Bracket Kit is safety certified by the U.S. Army.

The B Pillar Adjustable Height Mounting Bracket Left or Right is designed to give the operator the ability to adjust the gun system in the rear seat area on a HMMWV. The adjustability enables the operator optimum performance of the gun system. The B Pillar Mounting Bracket Adjustable Height is built using non-corrosive materials and it is primarily built for the SA4 Swing Arm and the H24-6 Machine Gun mount.

The B Pillar Mounting Bracket Left or Right is designed to give the operator the ability to adjust the gun system in the rear seat area on a HMMWV. The adjustability enables the operator optimum performance of the gun system. The B Pillar Mounting Bracket Adjustable Height is built using non-corrosive materials and it is primarily built for the SA4 Swing Arm and the H24-6 Machine Gun mount.

The HMMWV Mounting Bracket Kit installs on the right dashboard using 6 existing windshield hinge holes and 2 new holes. A drill template is supplied to locate the 2 new holes. A Travel Lock is supplied with the Kit and bolts to the front of the windshield frame using 3 existing holes. The Bracket provides a stainless steel post for a Swing Arm and Gun Mount to operate from the front right seat. The Travel Lock swings into place to pen into the travel lock block on the rear of the H24 family of machine gun mounts. A ball lock pin is used to secure the Travel Lock in place. The Travel Lock secures the weapon facing forward for a more menacing appearance. It is necessary for the vehicle to have a low air intake for the Swing Arm to reach maximum travel forward of the windshield for pointing a weapon to the left side. The Bracket and Travel Lock components are made from noncorrosive materials. The Mounting Bracket Kit is in use with U.S. Army and has been safety certified by the U.S. Army.

Bracket, Mounting, Swing Arm, Right C Pillar
Part No. M09-048
Travel Lock
Part No. M09-034

Bracket, Mounting, Swing Arm, Left C Pillar
Part No. M09-049
Travel Lock
Part No. M09-034

The HMMWV C Pillar mounting bracket bolts to two existing holes with the left and rear right door rim latches removed and requires two new holes on the left and right C Pillar bases. The C Pillar mounting bracket provides a stainless steel post for a swing arm and gun mount to operate. A travel lock bolts to the truck floor and swings in place to pin into the travel lock block on the rear of the H24 family of machine gun mounts. A ball lock pin is used to secure the travel lock in place. The bracket and travel lock components are made from noncorrosive materials. Use of the C Pillar mounting location is only recommended for HMMWV’s with outward facing rear seats.Use of the C Pillar mounting location is only recommended for HMMWV’s with outward facing rear seats. The bracket and travel lock are in use with the U.S. Army, U.S. Marine Corps, U.S. Navy, and U.S. Special Forces. The bracket and travel lock are safety certified by the U.S. Army.

The Bracket Mounting, Adjustable Height, HIMARS is a grab bar assembly with an incorporated adjustable height pintle for use with the Swing Arm Machine Gun Mount. The Bracket Mounting, Adjustable Height, HIMARS is a system that enables the operator of a HIMARS the ability to mount an M240B or M249 SAW Machine Guns and employ them from the Commanders Hatch. The Bracket Mounting, Adjustable Height, HIMARS is compatible with the armored cab of the HIMARS Launcher. This mounting bracket is not compatible with early HIMARS designs with the circular Commanders Hatch.

The Dashboard Mounting Bracket is designed to install in the interior location of the Truck Commander position to better facilitate the operation of the machine gun in that location. The mounting bracket is enabling the operator to pull the gun system inside of the vehicle while meeting the Army Standards for height requirements. The mounting bracket is made of a lightweight design in which the mounting bracket is mounted using existing holes in the vehicle. The Dashboard Mounting Bracket Adjustable Height is built using non-corrosive materials and it is primarily built for the SA4 Swing Arm and the H24-6 Machine Gun mount.

The Adjustable Height Mounting Bracket Kit bolts to the HMMWV Assault Cargo Rail
(Part No. M70-008 and M70-009) in existing holes. The adjustable height pintle posts provides a stainless steel post for mounting a Swing Arm and gun mount. A travel lock is provided on the bracket and swings in place to pin into the travel lock block on the rear of the H24 family of Machine Gun Mounts. A ball lock pin is used to secure the travel lock in place. The bracket and travel lock components are made from noncorrosive materials. The bracket and travel lock are in use with the U.S. Army, U.S. Navy, and U.S. Special Forces. The bracket and travel lock are safety certified by the U.S. Army.

The ITAS Mounting Bracket is designed to work with the Armor Holdings Mounting Bracket System for the Integrated Target Acquisition System. The ITAS Mounting Bracket is adjustable in height to meet the Army Standard of 5th to 95th percentile. The adjustable height portion of the mounting bracket has a track system in which enables the operator to adjust the mounting bracket height during night time operations. The ITAS Mounting Bracket Adjustable Height is built using non-corrosive materials and its was primarily built for the SA4 Swing Arm and the H24-6 Machine Gun mount, while accommodating the Gunner’s Protection Kit.